Программа Симпозиума

1. Materials for aviation and space technology
1-18с Wu Wei, Hui Huang, Zuoren Nie
State Key Laboratory of Materials Low-Carbon Recycling, Beijing University of Technology
Selective laser melting of erbium-containing aluminum alloys
1-23с Luo Yumeng, Wang Boya, Ye Wenjun, Song Xiaoyun, Yu Yang, Li Yanfeng and Hui Songxiao
GRIMAT Engineering Institute Co., Ltd.
Quasi-in situ observation of strain-stage-dependent deformation mechanisms
in Ti-0.20 alloy under high-strain-rate loading
1-15с Oi An*, Zishuo Ma. Luiun Huang*
School of Materials Science and Engineering, Harbin Institute of Technology
Achieving strength-ductility synergy in high-temperature α + β titanium alloy through in-situ tungsten alloying during laser powder bed fusion
1-16с Tingshu Chen, Hui Guo, Wenmin Zhao, Baixiong Liu*
College of Materials Science and Engineering, Jiangxi University of Science and Technology
Fabrication of porous tungsten with tunable pore structures via low-temperature pressureless sintering: Processing and mechanisms
1-8r Istomina E.I.¹, Istomin P.V.¹, Nadutkin A.V.¹, Grass V.E.¹, Belyaev I.M.¹,
Baeva O.G.¹, Istomina Yu.P. ^1,2
1 Institute of Chemistry FRC KomiSC UrB RAS
² Saint-Petersburg State University of Aerospace Instrumentation (SUAI)
Nanocrystalline SiC as a byproduct in gas-phase synthesis of C/SiC core-shell composite fibers
1-9r Belyaev I.M.¹, Istomina E.I.¹, Istomin P.V.¹, Nadutkin A.V.¹, Grass V.E.¹,
Istomina Yu.P.^1,2
1 Institute of Chemistry FRC Komi SC UrB RAS
² Saint-Petersburg State University of Aerospace Instrumentation (SUAI)
Siliciding of synthetic diamonds with SiO gas
1-10r Kharanzhevskiy E.V.¹, Makarov A.V.², Ipatov A.G.^3
1 Udmurt State University,
² M.N. Miheev Institute of Metal Physics of Ural Branch of Russian Academy of Sciences,
³ Udmurt State Agricultural University
Short-pulse laser treatment of materials: A novel approach for manufacturing advanced sliding friction units for space applications
1-21r Ergashev A.T.¹, Kalugina E.V.², Samoryadov A.V.^3
1 MIREA – Russian Technological University (Lomonosov Institute of Fine Chemical Technologies)
² Limited Liability Company POLYPLASTIC Group
³ Institution of Science Interdepartment Center of Analytical Research in Physics, Chemistry and Biology at the Presidium of the Russian Academy of Sciences
Modification of polymer composite materials based on a thermoplastic hybrid matrix of polyphenylene sulfide and polyamide
1-24r Aryshenskii Е.V.¹, Klepov D.N.¹, Konovalov S.V.¹, Kim S.O.¹, Shakarov T.U.¹, Makarova M.V.^2
1 Siberian State Industrial University
² Institute of Metal Physics of Ural Branch of RAS
Analysis of the patterns of texture formation during bending
1-26r Kashkarov E.B., Abdulmenova A.V., Krotkevich D.G.
National Research Tomsk Polytechnic University
Development of tough laminated metal-ceramic composites from Ti3Al(Si)C2 filled preceramic paper and refractory metal foils
1-10-y Kuzmenko E.D.
Tomsk Polytechnic University
Characterization and densification of ZrCN-ZrO2 ceramics
1-53r Loginov B.A.^1,4,5, Yu. Khripunov V.^2,5, Loginov V.B.^1,4,
Loginov A.B.^3,1,4
1National Research University of Electronic Technology – MIET
²Orel State University named after I.S. Turgenev
³Lomonosov Moscow State University, Department of Physics
⁴JSC PROTON Plant
⁵Educational Centre “Sirius”
World’s first space probe microscope СMM-2000С: а new look at the process of cosmic nano-dust formation

2. Materials for energy
2-17c Tongxiang Ma*, Xiangyan Chen, Qingyu Li
Northwest Institute for Non-Ferrous Metal Research
Accurate inheritance of nanomorphology from TiO2 to TiC via low-temperature molten salt electrolysis and as MnO2 support materials for zinc-ion batteries
2-11r Syrtanov M.S*, Kamelina K.D., Pirozhkov A.V., Krotkevich D.G.,
Abdulmenova A.V., Kashkarov E.B.
National Research Tomsk Polytechnic University
In situ diffraction studies of energy-related functional materials
2-12r Kuriganova A.B.
Platov South-Russian State Polytechnic University (NPI)
Electrochemical top-down approach to the preparation of electrocatalytically active metal nanoparticles-based materials
2-15r Gusev E.L.^1,2, Bakulin V.N.^3
1 Institute of Oil and Gaz of the Federal Research Center “Yakut Scientific Center Siberian Branch of the Russian Academy of Sciences”
² Institute of Mathematics and Computer Science of the Northeastern Federal University
³ Institute of Applied Mechanics of the Russian Academy of Sciences
Development of variational methods for predicting the determining characteristics of composites under the influence of extreme factors
2-16r Kudiiarov V.*, Kenzhiyev A., Elman R., Kurdyumov N.,
Laptev R., Lider A.
National Research Tomsk Polytechnic University
Development of new composites for hydrogen storage based on magnesium hydride and nanoscale additives
2-27r Kaygorodov A.S., Nikonov A.V.
Institute of Electrophysics UB RAS
Investigation of mechanical properties of c-YSZ obtained by magnetic-pulsed compaction of nanopowders
2-28r Zelenina E.V.¹, Churkina A.V.¹, Shcherbina O.B.², Palatnikov M.N.², Snyatkov I.V.^1
1 Saint-Petersburg State Institute of Technology
² Tananaev Institute of Chemistry, Kola Science Centre
Solid-phase microwave synthesis of luminescent materials
2-10c Yu Li, Liang Jing, Li Shilei, Zhang Wen
Northwest Institute of Nonferrous Metals
Effect of gradient heat treatment on microstructure and property of ODS molybdenum-rhenium alloy
2-13c Manling Sui*, Kuan Wang, Pengfei Yan
State Key Laboratory of Materials Low-Carbon Recycling, College of Materials Science and Engineering, Beijing University of Technology
Advancing layered cathode material’s cycling stability from uniform doping to non-uniform doping
2-51r Zhidkov I.S.1,2, Ozerova V.V.3, Kurmaev E.Z.1,2, Frolova L.A.3, Troshin P.A.4,3
1 Institute of Physics and Technology, Ural Federal University
2 M.N. Mikheev Institute of Metal Physics, Ural Branch of Russian Academy of Sciences
3 Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry, Russian Academy of Sciences
4 Zhengzhou Research Institute of HIT
Radiation stability of lead halide perovskites for solar cells applications
2-7-y Khramenkova A.V.¹, Moshchenko V.V.¹, Chernyavsky V.A.²,
Maximov M.Yu.^2
1 Platov South-Russian State Polytechnic University (NPI)
² Peter the Great Saint-Petersburg Polytechnic University
Synthesis of binder-free anode materials on the basis of carbon fabric, modified with transition metal oxides and polyacrylic acid for lithium-ion batteries
2-56r Barbin N.M., Titiov S.А.
Ural Institute of the State Fire Service EMERCOM of Russia
Theoretical study of the behavior of strontium radionuclide during heating of reactor graphite in an air atmosphere
2-58-r Petrzhik M.I.¹, Mukanov S.K.¹, Baskov F.A.¹, Ren X.^2,3, Feng P.³, Levashov E.A.^1
1 University of Science and Technology MISIS, Russia
² China University of Mining and Technology, China
³ Henan Academy of Sciences, China
Formation of composite protective coatings during the reactive electric spark treatment
of Nb substrate with AlCaSiY low-melting electrode

3. Materials for electronics
3-14c Yang Peng^1,2, Ding Zhaochong^1,2
1 Grikin Advanced Materials Co. Ltd.
² Bejing Technology Research Center for Sputtering Target Material Engineering
of High Pure Metals
High purity GeSbTe target for phase change memory
3-24c Ren Zehua1,2, He Jinjiang1,2, Luo Junfeng1,2
1 Grikin Advanced Materials Co. Ltd.
2 Bejing Technology Research Center for Sputtering Target Material Engineering of High Pure Metals
Study of high-purity low-oxygen content CoFeB for MRAM
3-22r Samatov M.R., Liu D., Vasenko A.S.
HSE University
Study of the influence of grain boundary structure on the properties
of CsPbBr₃ perovskite for solar cells
3-44r Rayanova K.A.¹, Babenko S.I.¹, Bryleva A.S.¹, Kanaev K.V.¹, Nigmatullina R.R.¹, Sudakova A.D.¹, Kudryavtsev O.A.¹, Shchegolkov A.V.¹, Komarov I.A.^1,2
1 Moscow Polytechnic University
² Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry RAS
Thin reduced graphene oxide based films for nanoelectronics and sensors
3-45r Kuznetsova S.A.^1,2, Golovanova О.A.^1,2, Pusovskaya D.V.^1
1 JSC “Omsk Research Institute of Instrument Engineering”
² Omsk State University named after F.M. Dostoevsky
Selection of sacrificial layers for obtaining foil from Al/Ni nanolayers with the effect of self-propagating high-temperature synthesis
3-48r Egorova A.V.^1,2, Obvintseva Ju.A.², Nabiev B.A.², Legonkova V.S.¹, Belova K.G.^2
1 The Institute of Solid State Chemistry of the Ural Branch of the Russian Academy of Sciences (ISSC UB RAS)
² Ural Federal University named after the first President of Russia B.N. Yeltsin
The effect of co-doping on the structure and transport properties of LaAlO3 perovskite
3-9-y Bayankina A.S.¹, Shivarova D.A.¹, Chuvakova M.A.¹, Ahmathanov A.R.¹,
Isaenko L.I.², Zhukov S.A.², Shur V.Ya.^1
1 Institute of Natural Sciences and Mathematics, Department of Optoelectronics and Semiconductor Technology
² Novosibirsk State University
The domain structure evolution during spontaneous backswitching in rubidium titanyl arsenate crystals
3-12-y Vasipullin V.A., Turygin A.P., Alikin D.O., Kosobokov M.S.,
Melnikov S.A., Shur V.Ya.
School of Natural Sciences and Mathematics, Ural Federal University
Study of charge injection during local switching on non-polar cut lithium niobate single crystals
3-20-y Ibragimova O.M., Panfilova E.V., Ibragimova A.R.
Bauman Moscow State Technical University (National Research University”
Obtaining structures based on colloidal superlattices with controlled parameters
3-25-y Lelyukh S.A., Ilinykh N.I., Petrova S.A., Ignatieva E.V., Gulyaeva R.I., Gelchinskii B.R., Rempel A.A.
Vatolin Institute of Metallurgy of the Ural Branch of Russian Academy of Since
Investigation of the possibility of forming of low-melting high-entropy alloys
3-26-y Malkova I.A., Ilinykh N.I., Gelchinskii B.R.
Vatolin Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences
Some regularities of changes in the thermodynamic properties of melts and compounds of the AIII – BV system

4. Biomedical materials
4-5c Chao Li, Hong Wei, Ruifang Hua, Jiarui Lu, Qihui Chen, Baixiong Liu*,
Xiao Li, Junshu Wu
College of Materials Science and Engineering, Jiangxi University of Science and Technology
3D Cu-BTC anchored on 2D MXene nanosheets using surface control approach for urea adsorption to achieve the regeneration of dialysate
4-4r Golovanova О.A., Shershneva A.E.
Dostoevsky Omsk State University
Crystallization of calcium phosphates from a model blood plasma solution
on human artificial vessels
4-5r Ostapenko M.G.^1,2, Semin V.O.³, D’yachenko F.A.¹, Yuzhakova S.I.^1,2
1 Institute of Strength Physics and Materials Science, Siberian Branch Russian
Academy of Sciences
² National Research Tomsk State University
³ Moscow Institute of Physics and Technology
Structure of the ion-beam treated Ti – Ni and Ti – Ni – Cu – Zr SMA
4-6r-y Gromova Ya.A., Shabatina T.I.
¹ Lomonosov Moscow State University, Department of Chemistry
² N.E. Bauman Moscow Technical University, Faculty of Fundamental Sciences
Silver-Cholesterol and Silver-Thiocholesterol aggregates for biomedical applications
4-19r-y Shevchenko O.V.^1,2, Yuryeva K.A.¹, Chernenko I.N.^1,2
1 Pacific State Medical University
² Institute of Chemistry
The development of a novel generation of photosensitizers activated by X-ray irradiation for the treatment of cancerous diseases
4-30r Ryzhkova A.S.¹, Vernaya O.I.^1,2, Shabatina T.I.^1,2
1 Bauman Moscow State Technical University (BMSTU),
² Lomonosov Moscow State University (MSU)
Cryochemical synthesis of silver and zinc oxide nanoparticles
4-34r Basok Yu.B.¹, Grigoriev A.M.¹, Kuznetsova E.G.¹, Belova A.D.¹, Novikov I.A.², Kulakova V.K.³, Lozinsky V.I.³, Sevastianov V.I.^{1, 4
1} Shumakov National Medical Research Center of Transplantology and Artificial Organs
² The Research Institute of Eye Diseases
³ A.N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences
⁴ The Institute of Biomedical Research and Technology
Cryogenically structured macroporous 3D-scaffold for tissue engineering from products of enzymatic hydrolysis decellularized liver
4-36r Eroshenko A.Yu.¹, Legostaeva E.V.¹, Khimich M.A.¹, Glukhov I.A.¹, Tolmachev A.I.¹, Uvarkin P.V.¹, Kuznetsov V.P.², Stepanov S.I.²,
Vorontsov I.A.², Yurovskikh A.S.², Mukanov G.Zh.², Sharkeev Yu.P.^1,3
1 Institute of Strength Physics and Materials Science SB RAS
² Ural Federal University
³ National Research Tomsk Polytechnic University
Effect of heat treatment of ultrafine-grained Ti – 39.5 Nb – 5 Zr alloy on its structural parameters and thermophysical properties
4-41r Kashirskaya N.N.¹, Chernysheva E.V.¹, Khomutova T.E.¹, Demkina E.V.^2
1 Institute of Physico-Chemical and Biological Problems of Soil Science of the Russian Academy of Sciences
² S.N. Vinogradsky Institute of Microbiology of the Russian Academy of Sciences
Biomedicine potential of microorganisms isolated from the soils of archaeological sites
4-49r Khavpachev M.A.^1,2, Malyk B.V.^1,2, Ivanov P.L.^1,2, Akopova T.A.^1
1 Enikolopov Institute of Synthetic Polymeric Materials, Russian Academy of Sciences
² Litvinenko Institute of Physical-Organic Chemistry and Coal Chemistry
Preparation and study of solid dispersions of benzocaine with polysaccharides
4-11-y Sipiagina S.M., Golovanova O.A.
Department of inorganic Chemistry of Dostoevsky Omsk State University
Study of the physicochemical properties of a material based on selenite-substituted hydroxyapatite and collagen
4-13-y Provorkina A.A., Golovanova O.A.
Dostoevsky Omsk State University
Characteristics of the interaction of hydroxyapatite with lactic acid
4-17-y Anokhin А.S., Kirsankin A.A., Chuvikina M.S., Luk’yanov A.S., Ermakova E.A.
Baikov Institute of Metallurgy and Materials Science of RAS
Investigation of biological properties of Ti – Al – Nb alloy system with addition of rare earth elements (Ce,Y,La)
4-18-y Shivarova D.A., Bayankina A.S., Kuznetsov D.K., Shur V.Ya.
Institute of Natural Sciences and Mathematics, Ural Federal University, named after the first President of Russia, B.N. Yeltsin
Dynamics of capillary fluid flow on aluminum surfaces structured by nanosecond laser irradiation
4-19-y Belova A.D.¹, Nemets E.A. ¹, Guseva E.A.^{1, 2}, Grigoriev A.M.¹,
Basok Yu.B.¹, Sevastianov V.I.^{1, 3
1} Shumakov National Medical Research Center of Transplantology and Artificial Organs
² MIREA Russian Technological University
³ Institute of Biomedical Research and Technology
Porous scaffold derived from polycaprolactone and enzymatic degradation products of decellularized cartilage
4-5-y Bitter S.M., Girsova S.L., Poletika T.M.
Institute of Strength Physics and Materials Science SB RAS
Effect of aging on the structure and mechanical properties of nanocrystalline Ti 50.9 at. % Ni alloy
4-6-y Chernenko I.N.^1,2, Shevchenko O.V.^1,2
1 Pacific State Medical University
² Institute of Chemistry
Investigation of biological activity of bioactive 52S4.6 glasses doped with magnesium
4-24-y Iskhakova E.I.1,2, Churakova А.А.1,2
1 Ufa University of Science and Technology
2 The Institute of Physics of Molecules and Crystals — subdivision of the Ufa Federal Research Center of the Russian Academy of Sciences
Investigation of corrosion resistance in biological environments of tini alloy with different microstructure
4-59r Smirnov I.V.¹, Smirnova P.V.¹, Teterina A.Yu.¹, Minaichev V.V.², Fadeeva I.S.², Komlev V.S.^1
1 Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
² Institute of Theoretical and Experimental Biophysics, Russian Academy of Sciences
Structural features and phase transformation of low-temperature calcium posphate materials from dicalciumphosphate dihydrate to hydroxyapatite
4-33-с Jie Wu¹, Shiwei Xu¹, Hongjie Luo^1,2, Jianrong Xu¹, Shouyan Hu^1
1 School of Metallurgy, Northeastern University, Shenyang, China
² Engineering Research Center of Ministry of Education for Advanced Materials
Preparation Technology, Shenyang, China
Mechanical properties of titanium foam prepared by vacuum distillation-sintering method
4-62r Grzhegorzhevskii K.V.^1,2, Denikaev A.D.³, Pryakhina V.I.¹,
Greshnyakov E.D.¹, Strubovsсhikova V.M.⁴, Huaman I.A.⁴,
Zun P.S.⁴, Skorb E.V.^4
1 Ural Federal University
² Institute for Regenerative Medicine, Sechenov University
³ Department of Physics and Engineering, ITMO University
⁴ Infochemistry Scientific Center, ITMO University
The keplerate {Mo132}-assisted self-assembly of hierarchical melamine-based microspheres in solution: a bottom-up strategy for functional materials
4-54r Potseleev V.^1,2, Khavpachev M.^2,3, Akopova T.^2
1 Skolkovo Institute of Science and Technology
² Enikolopov Institute of Synthetic Polymeric Materials, Russian Academy of Sciences
³ Litvinenko Institute of Physical-Organic Chemistry and Coal Chemistry
Novel amphiphilic chitosan derivatives: synthesis, characterization and behavior in dilute aqueous solutions

5. Rare and precious metals, high-purity substances
5-3c Wu Shaopeng1,2,4, Wang Dongxin1,2,#, Li Hailong4, Wan Qingfeng1,2, Li Junyi1,2, Zhu Baohui1,3, Wang Ze1,2
¹ State Key Laboratory of Special Rare Metal Materials
² Northwest Rare Metal Materials Research Institute Ningxia Co., Ltd.
³ Ningxia Horizontal Titanium Industry Co., Ltd.
⁴ CNMC Ningxia New Materials Co., Ltd.
Study on the genetic behavior of microstructure during the preparation process
of Cu – Be – Ni alloy
5-9c Keng Xie
BGRIMM Technology Group
Multi-component directional enrichment, separation and extraction of a lean refractory sulfide concentrate containing nickel, copper, cobalt and platinum-group metals
5-20c Zhang Xiaowei^1,2*, Wang Yixuana², Yang Hongbo^1,2, Wang Zhiqiang^1,2
1 GRINM Group Co., Ltd.
² National Engineering Research Center for Rare Earth,
Grirem Advanced Materials Co., Ltd.
Purification of rare-earth metal La by the Czochralski method
5-26c Zihao Xu^1,2, Rui Chen¹, Zheng Zhao¹, Yongqi Zhang¹, Meisheng Cui¹, Yongke Hou¹, Juanyu Yang ^1,* and Xiaowei Huang^1,2,*
1 National Engineering Research Center for Rare Earth, GRIREM Advanced Materials Co., Ltd.
² School of Metallurgy, Northeastern University
Investigation of the dual-regulatory mechanism of Zr in MnRE1 – xZrxO2 + δ oxide catalysts for NO oxidation
5-29c Ze Wang^1,2, Dongxin Wang1^,2, Xiaojun Zhou^1,2,3, Xixue Mi^1,2, Shaopeng Wu^1,2, Yunyun Yang^2
1 National Key Laboratory of Special Materials for Rare Metals
² Zhongse (Ningxia) Oriental Group Co., Ltd.
³ Ningxia Orient Tantalum Industry Co., Ltd.
The research of high-temperature behavior of K2TaF
5-55r Molchanov V.P.
Far East Geological Institute, Far East Branch, Russian Academy of Sciences
Ways of industrial development of gold-titanium-bearing placers of Sikhote-Alin ultrabasites using pyro-hydrometallurgy methods

6. Materials for energy saving. Green technologies, catalysts
6-14r Kubanova M.S., Kuriganova A.B., Smirnova N.V
Platov South-Russian State Polytechnic University (NPI)
Electrochemical dispersion of aluminum by alternating pulse current
6-18r Smirnova N., Molodtsova T., Ulyankina A.
Platov South-Russian State Polytechnic University (NPI)
Top-down electrochemical methodology for metal oxides multifunctional materials preparation
6-20r Vissurkhanova Ya.A.^1,2, Ivanova N.M.¹, Soboleva Ye.A.^1
1 LLP “Institute of Organic Synthesis and Coal Chemistry of the Republic of Kazakhstan”
² Karaganda Buketov University
Zinc-polymer composites in the electrocatalytic hydrogenation of p-nitroaniline
6-43r-y Korol A.¹, Zadorozhnyy V.¹, Berdonosova E.², Assanova E.¹,
Statnik E.¹, Klyamkin S.^2
1 National University of Science and Technology “MISIS”
² Department of Chemistry, Lomonosov Moscow State University
Internal stresses analysis in TiFe alloy
6-6c Chaoshu Duan*, Hui Yin, FeiFeng Wu, Ruochen Tang, Zilong Zhao, Zhengyuan An, Jianguo Huang, Aimin Zhang*
Kunming Insitute of Precious Metals, State Key Laboratory of Precious Metal Functional Materials, Yunnan Precious Metal Laboratory Co. Ltd.
Deep learning-based methods for establishing quantitative structure-property relationship models
6-8c Kaborson Ke¹, Dongjie Ke¹, Yuhang Li¹, Jinxing Li², Yuyu xue^1
1 Fujian Science&Technology Innovation Laboratory
² Fuzhou Metal-new Alu. Tech. Co, Ltd.
Research on the application of Microbubble Flotation (MBF) technology in Al-alloy melt
6-23-y Dorosheva I.B., Pechishcheva N.V., Burdina L.G., Rempel A.A.
Vatolin Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences
Sol-gel synthesis and characterization of titanium dioxide nanoparticles for efficient arsenic sorption from aqueous solutions
6-61r Buzanov G.A., Nipan G.D., Zhizhin K.Yu., Kuznetsov N.T.
Kurnakov Institute of General and Inorganic Chemistry
of the Russian Academy of Sciences
Subsolidus phase equilibria in the Li₂O – MnOy – VOx system
6-62r Stel’makh S.A., Shcherban’ E.M.
Don State Technical University
New materials in construction. Problems and prospects
6-34-с   Li Z.B., Liu X.J.*, Wu Y., Wang H., Jiang S.H., Zhang X.B., Lu Z.P.*
University of Science and Technology
Beijing Empowering multicomponent alloys with unique nanostructure for exceptional oxygen evolution performance through self-replenishment

7. Surface phenomena and coating technologies
7-1c Dongxin Wang, Yao Xie, Junyi Li, Qingfeng Wan, Xu Zhang, Peng Zhang, Zhengfei Li, Yiqun Yang, Shurong Li
National Key Laboratory for Special Materials of Rare Metals, Northwest Rare Metal Materials Research Institute Ningxia Co., Ltd.
Research on surface protection of conductive chemical oxidation of high performance cast Be – Al alloy
7-11c Lintao Liu*, Shuwei Guo, Shaopeng Wang, Fei He, Pei Wang, Haibing Lv
Department of Corrosion and Protection, Northwest Institute for Non-ferrous Metal Research
Microstructure and phase evolution of Cr2N composite coating on 316H substrates by pack chromizing-gas nitriding and plasma chromizing gas nitriding treatment
7-27c Shuwei Guo*, Lintao Liu, Shaopeng Wang, Fei He
Northwest Institute for Non-ferrous Metal Research
Preparation of Cr – N coatings on stainless steel via pack chromizing and gas nitriding, and enhanced compatibility of coatings to liquid metal
7-28c Kai Hu¹, Jianbao Gao¹, Bo Song^1*, Bing Liu², Yusheng Shi^1
1 State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology
² Wuhan Second Ship Design and Research Institute
Interfacial characteristics of 316L/NAB heterogeneous materials fabricated by laser directed energy deposition
7-25r Blinov I.V., Milyaev M.A., Korkh Yu.V., Kuznetsova T.V.,
Devyaterikov D.I., Falahutdinov R.M., Osinnikov E.V.
M.N. Mikheev Institute of Metal Physics of the Ural Branch of the Russian Academy of Sciences (IMP UB RAS)
Structural and magnetic properties of ironcontaining nanostructures with unidirectional anisotropy
7-38r Kiryukhantsev-Korneev Ph.V.^1*, Chertova A.D.¹, Feng P.², Ren X.^2,3, Levashov E.A.^1
1 National University of Science and Technology “MISIS”
² China University of Mining and Technology
³ Henan Academy of Sciences
Hard wear- and oxidation-resistant coatings produced by high power impulse magnetron sputtering of ceramic targets based on MAX- and MAB- phases
7-39r Chertova A.D., Kiryukhantsev-Korneev Ph.V., E.A. Levashov E.A.
University of Science and Technology MISIS
Comparative study of wear-resistant Ta-Si-C-(N) coatings deposited by DCMS and HIPIMS methods
7-46r Amdur A.M.¹, Fedorov S.A.^1,2, Pavlov V.V.¹, Pechishcheva N.V.², Kurmacheva V.S.¹, Vlasov I.A.¹, Yurak V.V.^1
1 Ural State Mining University
² Vatolin Institute of Metallurgy of Ural Branch of the Russian Academy of Sciences
Patterns of electrophoresis of colloidal solutions with a metallic dispersed phase on the example of silver
7-8-y Khramenkova A.V., Finaeva O.A.
Platov South-Russian State Polytechnic University (NPI)
One-step electrochemical synthesis OF Co – Mn spinel coatings for SOFC interconnect application

9. Functional materials, including refractory, superhard materials, magnetic materials
9-2c Wu Gang, Yao Guocheng, Ma Zhaohui, Yan Xiao and Yan Guoqing, Huang Yongzhang*
GRINM Resources and Environment Tech. Co., Ltd.
Preparation and performance study of new gadolinium-based neutron absorption foil
9-4c Baojian Wang, Wen Zhang, Zhongwu Hu, Jianfeng Li, Hailong Xu
Northwest Institute for Non-ferrous Metal Research
Creep behaviour investigation of Mo – 3.5 % Nb – 0.4 % W monocrystal with different crystallographic orientations via nanoindentation
9-7c Yan Guoqing^*1, Yao Guocheng¹, Li Peipei², Ma Zhaohui¹,
Yan Xiao¹, Wu Gang^1
1 GRINM Resources and Environment Tech. Co., Ltd.
² University of Science and Technology Beijing
Study on hot deformation behaviour and microstructural evolution of YCr alloys
9-1r Komornikov V.A., Novikova N.E., Gudymenko A.V., Matveeva D.S.,
Voloshin А.E., Shubnikov A.V.
Institute of Crystallography of the Kurchatov Complex Crystallography and Photonics of the NRC “Kurchatov Institute”
Complex transition metal chlorides as selective optical filters
9-2r Pashkov O.D., Ovechkina V.A., Pokrovsky M.A., Yurkov A.L.
D.I. Mendeleev Russian University of Chemical Technology
Vibro-cast refractories based on silicon carbide
9-3r Pashkov O.D.^1,2, Kharitonov D.V.^1,2, Mikhalevsky D.A.¹, Pechenkin K.V.^1
1 Obninsk Scientific and Production Enterprise Technologiya named after A.G. Romashin
² D.I. Mendeleev Russian University of Chemical Technology
Quartz ceramics produced by slip casting with granules
9-21c Yunbo Li^1,2,4,5, Haofeng Xie^1,4,5, Zhihao Zhang^2,3, Songxiao Hui^4,5,6, Yanfeng Li^1,4,5*, Xiaoyun Song^1,4,5, Wenjun Ye^1,4,5, Yang Yu^1,4,5,
Yumeng Luo^1,4,5
1 State Key Laboratory of Nonferrous Metals and Processes,
China GRINM Group Co., Ltd.
² Key Laboratory for Advanced Materials Processing (MOE), Institute for Advanced Materials and Technology, University of Science and Technology Beijing
³ Beijing Laboratory of Metallic Materials and Processing for Modern Transportation, Institute for Advanced Materials and Technology, University of Science and Technology Beijing
⁴ GRIMAT Engineering Institute Co., Ltd.
⁵ General Research Institute for Nonferrous Metals
⁶ GRINM (Guangdong) Institute for Advanced Materials and Technology
The mechanical alysis, simulation and experimental validation of TiNiFe alloy ring and tube fastening connection process
9-22c Yong Liu*, RuochongWang
Central South University, Changsha
Study on novel diamond composites
9-17r Ponomareva E.A.¹, Chumakov R.G.², Maslova S.A.¹, Gerasimov E.G.^{1, 3},
Mushnikov N.V.^{1, 3}, Kuznetsova T.V.^{1, 3
1} M.N. Mikheev Institute of Metal Physics UB RAS
² National Research Centre “Kurchatov Institute”
³ Ural Federal University
Resonant photoemission of ErNi2 intermetallic compound
9-23r Konovalov S.V., Aryshenskii E.V., Levagina A.A.
Siberian State Industrial University
Study of the formation of microstructure and properties in the production of tape from homogenized alloys ALTEK
9-29 Ilinykh N.I., Malkova I.A., Lelyukh S.A., Gelchinskii B.R., Rempel A.A.
Vatolin Institute of Metallurgy of the Ural Branch of Russian Academy of Since
Thermodynamic modeling of equilibrium composition and characteristics of alloys
of Nb – Ta – Mo – W system
9-31r Vernaya O.I.^1,2, Shumilkin A.S.^1,2, Kravchenko A.S.¹, Shabatin A.V.³, Shabatina T.I.^1,2
1 Lomonosov Moscow State University,
² Bauman Moscow State Technical University,
³ The Institute of Physical Chemistry and Electrochemistry RAS
Cryochemical synthesis of magnetic nanoparticles
9-32r Beliaev D.V.¹, Kovalenko Yu.E.¹, Shreder E.I.¹, Radzivonchik D.I.¹, Kokh K.O.², Tereshchenko O.E.^1,3, Kuznetsova T.V.1
¹ M.N. Miheev Institute of Metal Physics of UB RAS
² V.S. Sobolev Institute of Geology and Mineralogy of the Siberian Branch of the RAS,
³ Rzhanov Institute of Semiconductor Physics of the Siberian Branch of the RAS
Ellipsometry study of Bi1.1Sb0.9Te2S topological insulator in UV/VIS region
9-33r Zverev A.E.¹, Kalugina E.V. ², Markov A.V.^1
1 MIREA – Russian Technological University (Lomonosov Institute of Fine Chemical Technologies)
² Limited Liability Company POLYPLASTIC Group
The effect of carbon black with a different surface area on the electrical characteristics of low-density polyethylene for special-purpose products
9-35r Yarmoshenko Yu.M.¹, Kantur I.E.¹, Radzivonchik D.I.¹, Zhivulin V.E.²,
Zhizhin E.V.³, Koroleva A.V.³, Vinnik D.A.², Kuznetsova T.V.^1
1 M.N. Mikheev Institute of Metal Physics UB RAS
² South Ural State University
³ St. Petersburg University
Determination of the spin state of Fe ions in Barium hexaferrite BaFe12 – x TixO19 (x = 1, 2.5) by X-ray spectroscopy
9-40r Niyozbekov N.N.¹, Malakhov A.Yu.¹, Saikov I.V.1, Shakhray D.V.², Denisov I.V.¹, Boyarchenko O.D. ^1
1 Merzhanov Institute of Structural Macrokinetics and Materials Science RAS
² Federal Research Center of Problems of Chemical Physics and Medicinal Chemistry RAS
Influence of refractory metal interlayers on the structure and mechanical properties of explosive-welded AlMg6 – 12Cr18Ni10Ti composite material
9-42r Lysenko E.N., Elkin V.D., Vlasov V.A.
Tomsk Polytechnic University
Study of mechanochemical transformation of a mixture of α-Fe and α-Fe2O3 powders into magnetite by XRD analysis
9-47r Polukhin M.S.¹, Karavaev I.A.¹, Savinkina E.V.¹, Buzanov G.A.², Kubasov A.S.2, Grigoriev M.S.3
¹ MIREA – Russian Technological University, The Lomonosov Institute of Fine Chemical Technologies
² Kurnakov Institute of General and Inorganic Chemistry of the RAS
³ The Institute of Physical Chemistry and Electrochemistry of the RAS
Solution combustion synthesis of highly dispersed rare earth oxides employing novel coordination compounds of REE(NO3)3 -DMAA-H2O systems
9-25c Zhou Yang^1,2, Zhe Ni^1,2, Jie Yan^1,2, Longyi Fan^1,2, Jin Zhang^1,2,*, Xiaolin Chen^1,2, Renguo Guan1,2,**
¹ Key Laboratory of Near-Net Forming of Light Metals of Liaoning Province, Dalian Jiaotong University
² Engineering Research Center of Continuous Extrusion, Ministry of Education, Dalian Jiaotong Universitya
Towards high performance nano multilayered graphene/5052 Al composite: In situ interfacial tailoring via accumulative roll bonding
9-50r Thet Naing Myint, Krivoborodov Yu.R., Htet Paing Aung
Department of Chemical Technology of High-temperature composite and Binding Materials
D.I. Mendeleev Russian University of Chemical Technology
Study of the composite cements with increased corrosion resistance
9-51r Konovalov S.V., Drobyshev V.K., Panchenko I.A., Xizhang Chen
Siberian State Industrial University
Mechanical properties and structure of high-entropy alloys СoCrFeMnNi and CoCrZrMnNi systems
9-4-y Volgina E.
Herzen State Pedagogical University of Russia
Relaxation processes in trackmembranes based on PVDF
9-14-y Kovrev Y.S., Ziyatdinova M.Z., Ignat’eva E.S., Golubev N.V.
D.I. Mendeleev University of Chemical Technology
Synthesis and study of antimony-borosilicate glasses with a high refractive index
9-16-y Mogilnikova L.D., Menushenkov V.P., Mogilnikov P.S., Savchenko A.G.
National University of Science and Technology MISIS
Phase transformations in the synthesis process of strontium hexaferrite SrFe12O19 by the sol-gel method
9-27-y Kulikova T.V., Pechishcheva N.V., Kovalenko D.A., Bykov V.A. Burdina L.G., Belozerova A.A.
Vatolin Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences
Kinetiсs of TiO2 samples calcination
9-2-y Nechaev K.S., Vazhinskii N.M., Fortuna A.S., Gorshenkov M.V.
National University of Science and Technology MISIS, Institute of New Materials
Magnetic properties, phase and structural state of Ga-doped τ-MnAl during ball-milling
9-57-r Vakhrushev R.A.^{1, 2}, Dzidziguri E.L.¹, Vakhrusheva I.O.^3
1 National University of Science and Technology «MISIS», 117049, Moscow, Russia
² Baikov Institute of Metallurgy and Materials Science of the Russian Academy
of Sciences, 119334, Moscow, Russia
³ Federal state unitary enterprise All-russian scientific research institute of aviation materials of the National research center «Kurchatov institute», 105005, Moscow, Russia
Method for evaluating the mixing of nano- and micro-sized powders
9-60r Sipatov I.S., Petrova S.A., Ignatieva E.V., Fedorov S.A., Bykov V.A., Rempel A.A.
Vatolin Institute of Metallurgy, Ural Branch, Russian Academy of Sciences
Synthesis and structure of refractory multicomponent alloys
9-35-с   Yuan Wu
University of Science and Technology Beijing
Overcoming oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering

10. New technologies in metallurgical process
10-12c LiwenMa, CongjianZhang, XiaoliXi, ZuorenNie
State Key Laboratory of Materials Low-Carbon Recycling, College of Materials Science and Engineering, Beijing University of Technology
Separation of tungsten and molybdenum by selective adsorption with zirconium based metal organic framework
10-19c Xiaoli Xi*, Zuoren Nie
National Key Laboratory of Materials Low-Carbon Recycling,
Beijing University of Technology
Research progress on efficient recycling of secondary resources of refractory metals
10-7r-y Iskhakova P.V., Barannikova S.A.
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences
Plastic strain inhomogeneity in additively built Al – Mg alloy
10-13r Kuznetsov P.V., Rubtsov K.V., Burlachenko A.G., Shmakov V.V., Mishin I.P.
Institute of Strength Physics and Materials Science Siberian Branch of Russian Academy of Sciences
General corrosion behaviour of pure copper with optimized structure based on grain boundary engineering
10-30-c Guangzong Zhang*, Shuo Zhang, Qing He, Junwen Li, Renguo Guan*
Engmecring-Research Conter of Contnuous Extrusion, Ministry of Education, Dalan Iaotong University, China
CRE AL-5Ti-1B Refiner Development and the Applications in-Recycled Aluminum Alloys


11. Simulating and digitizing in metallurgical process
11-37r Lipatnikova Ya.D.¹, Mun G.A.^1,2, Solov’eva Yu.V.^1
1 Tomsk State University of Architecture and Building
² JSC Tomsk NIPIneft
Multi-level model for the analysis and prediction of metal-intermetallic layered composites deformation behavior
11-22-y Burova Yu.E., Dmitriev A.N., Vitkina G.Yu., Barbin N.M.
Vatolin Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences
Thermodynamic modeling of the influence of hydrogen-containing gases on the reduction process of iron ore titanomagnetite pellets
11-31-c Zuowei Zhang¹, Minqiang Gao^{1, 2, 2*}, Yunhe Ning¹, Renguo Guan^{1, 2, 3*
1} School of Materials Science and Engineering, Dalian Jiaotong University, China
² Liaoning Key Laboratory of Near-Net Shape Forming of Light Metal Materials, Dalian Jiaotong University, Dalian 116028, China
³ Engineering Research Center of Continuous Extrusion, Ministry of Education, Dalian Jiaotong University, Dalian 116028, China
Improving the defects and mechanical properties via secondary loading in a squeeze
casting heat-treated Al-Cu alloy
11-32-c Sen Zhou, Cong Wang, Mouhamadou A. Diop, Bingliang Gao, Zhaowen Wang*
School of Metallurgy, Northeastern University, Shenyang 110819, China
Numerical and On-Site Validation of Current Fluctuations and Cathode Wear on Melt Flow Stability in Flexible Aluminum Electrolysis Cells